A plumbing fittings manufacturer has been fined $60,000 after a worker suffered serious burns when molten metal erupted from an induction furnace at its Highett facility.

Reliance Worldwide Corporation (Aust) Pty Ltd pleaded guilty in the Moorabbin Magistrates’ Court to failing to provide and maintain safe systems of work. The company was sentenced without conviction in relation to an incident on 14 November 2023.
In November 2023 an induction furnace operator at Reliance Worldwide was mixing metal alloys, including zinc and copper, in a crucible when molten metal erupted and splashed onto his left leg and into both of his shoes, causing serious burns to his leg and both feet.
Molten metal typically reaches temperatures of 900–950°C and can reach 1100°C. The court heard that workers undertaking the task needed a combination of primary and secondary personal protective equipment (PPE) to protect against molten metal splashes. Appropriate clothing when working with molten metal also needs to be designed to prevent molten metal becoming trapped in cuffs or pockets.
The furnace operator was wearing only secondary PPE, consisting of a high-visibility shirt and pants. Leather aprons were available, but their use was left to workers' discretion and was not required by the work instructions provided by Reliance Worldwide.
The company failed to provide and require appropriate protective clothing, including leather jackets and pants, or equivalent heat-resistant materials, as well as leather footwear protection such as spats or gaiters.
The court observed that the risk of serious injury around an induction furnace was obviously high. It also emphasised that employers must formally adopt and actively enforce safe work systems, taking human error into account rather than relying on workers to exercise discretion.
WorkSafe publishes guidance for employers engaging in foundry, metal fabrication or metal casting activities. Employers have free access to information about how to identify and control the hazards associated with molten metal and to ensure the safety of their workers at WorkSafe’s Foundries and metal fabrication page, as well as in the Compliance code: Metal casting | WorkSafe Victoria.
The Victorian Government has finally responded to the Sentencing Advisory Council’s 12 recommendations for reform regarding the sentencing of OHS offences in Victoria and legislated to increase maximum penalties for aggravated breaches of Section 21 of the OHS Act. The Government accepted the recommendation to increase all general duty in-principle’ however there is no clear implementation timeline on this reform.
Read more: Prosecution Result Summaries and Enforceable Undertakings | WorkSafe Victoria